Side Feeder
Extruder Side Feeder

Side Feeder

Fibers, talcum powder, and flame retardants are difficult to transport at the main feeding port, and the microstructure of the material is destroyed as soon as it enters the screw. So, side feeder is the best solution. Especially plastic modification, plastic recycling, plastic filling, etc.

             JETZT ANFRAGEN
Produktparameter
Typ Power(KW) Screw diameter(MM) Screw material Max speed(R/Min) Extruder output(KG/H)
M-SF20 0.37 20 M2/ SS/etc. 250 0.5~15
M-SF25 0.37 25 M2/ SS/etc. 250 5~30
M-SF35 0.75 30 / 35.6 M2/ SS/etc. 300 60~120
M-SF50 1.5 / 2.2 41 / 50 M2/ SS/etc. 300 150~250
M-SF65 2.2 / 3 51.4 / 62.4 M2/ SS/etc. 350 250~400
M-SF75 3 / 4 62.4 / 71 M2/ SS/etc. 350 450~650
M-SF95 4 /5.5 81 / 93 M2/ SS/etc. 400 700~1000

Composition Of Side Feeder

  • Hopper and volumetric feeder
  • Side feeding main motor
  • Side feeding reducer
  • Side feeding twin screw
  • Flange connection
  • Base
  • Inverter and control system (commonly integrated into the host control system, but can also be separated)

 

Application Of Side Feeder

  • Composite of plastic, glass fiber, and carbon fiber (e.g., PA+30% CF)
  • When adding too much powder, it can be fed in batches through side feeding
  • During the material composite process, additives or colorants are transported
  • During the recycling process, the main feed is used to transport the recycled raw materials, while the side feed is used to add powders, colorants, additives, and so on

 

In the plastic industry, side feeding is an essential step. Accurately pushing fiberglass or powder into the melt, the process is gentle and does not damage the material structure, retaining the long fiber skeleton, allowing your product to confidently undergo mechanical testing by third parties.

Kontakt